F065
Średnica nominalna rury zewnętrznej:
- Zalecane przez Enterprise Standard of HL Cryogenic Equipment. Może być również produkowane zgodnie z wymaganiami klienta.
- Ciśnienie projektowe:
- Zalecane ≤ 16 barów. Można również wybrać typ połączenia spawanego (≤ 40 barów).
- Materiał rury zewnętrznej
Jeśli nie ma specjalnych wymagań, materiał rury wewnętrznej i zewnętrznej zostanie wybrany taki sam.
3.1.3 Typ połączenia spawanego
odel
Połączenie
Typ
Średnica nominalna rury wewnętrznej
Ciśnienie projektowe
Tworzywo
rury wewnętrznej
Standard
Uwaga
W010
00X
Złącze spawane do węża elastycznego izolowanego próżniowo statycznie
DN10, 3/8"
8~40 bar
Stal nierdzewna serii 300
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Średnica nominalna rury zewnętrznej: | |
| Ciśnienie projektowe | Materiał rury wewnętrznej. | A wynosi 304, | DN40, 1-1/2" | C wynosi 316, |
| D to 316L, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Ciśnienie projektowe |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Zalecane ≤ DN25 lub 1". Można również wybrać typ połączenia bagnetowego próżniowego z kołnierzami i śrubami (od DN10, 3/8" do DN80, 3"), typ połączenia spawanego (od DN10, 3/8" do DN150, 6") | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Standard | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Średnica nominalna rury zewnętrznej: |
| Zalecane przez Enterprise Standard of HL Cryogenic Equipment. Może być również produkowane zgodnie z wymaganiami klienta. | Materiał rury zewnętrznej | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Typ | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Standard | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Ciśnienie projektowe. | / | DN25, 1" | DN25, 1" | / | |
| Materiał rury wewnętrznej. | / | DN25, 1" | DN25, 1" | / | |
| C wynosi 316, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Średnica nominalna rury wewnętrznej:
| Zalecane ≤ DN25 lub 1". Można również wybrać typ połączenia bagnetowego próżniowego z kołnierzami i śrubami (od DN10, 3/8" do DN80, 3"), typ połączenia spawanego (od DN10, 3/8" do DN150, 6") | Średnica nominalna rury zewnętrznej: |
| Zalecane przez Enterprise Standard of HL Cryogenic Equipment. Może być również produkowane zgodnie z wymaganiami klienta. | Ciśnienie projektowe: |
| Zalecane ≤ 16 barów. Lub wybierz typ połączenia spawanego (≤ 40 barów) | Materiał rury zewnętrznejJeśli nie ma specjalnych wymagań, materiał rury wewnętrznej i zewnętrznej zostanie wybrany taki sam.3.2Dynamiczny system rur izolowanych próżniowo3/S |
| 3.2.1 Typ połączenia bagnetowego próżniowego z zaciskami | odel |
| Połączenie | Typ |
| Średnica nominalna rury wewnętrznej | Ciśnienie projektowe |
| Tworzywo | rury wewnętrznej |
| Standard | Uwaga |
HDB01008
Złącze bagnetowe próżniowe z zaciskami do dynamicznego węża elastycznego izolowanego próżniowo
lDN10, 3/8"
l8 bar
| Stal nierdzewna serii 300 C wynosi 316, | Materiał rury wewnętrznej. | |
| A wynosi 304, | B to 304L,C wynosi 316,D to 316L, | |
| E jest inne. | HLH | DB01508 |
| DN15, 1/2" | Ciśnienie projektowe: | Ciśnienie projektowe: |
| DN20, 3/4" | Ciśnienie projektowe: | Ciśnienie projektowe: |
| DN25, 1" | Ciśnienie projektowe: | Ciśnienie projektowe: |
| Średnica nominalna rury zewnętrznej: | Ciśnienie projektowe: | Ciśnienie projektowe: |
Zalecane ≤ 8 barów. Można również wybrać połączenie bagnetowe próżniowe z kołnierzami i śrubami (≤ 16 barów) lub połączenie spawane (≤ 40 barów).Materiał rury zewnętrznejJeśli nie ma specjalnych wymagań, materiał rury wewnętrznej i zewnętrznej zostanie wybrany taki sam.
Stan zasilania:
HL-HX-X-Obiekt musi dostarczyć energię elektryczną do pomp próżniowych i przekazać firmie HL Cryogenic Equipment lokalne informacje o poborze energii elektrycznej (napięcie i częstotliwości).-00-X
3.2.2 Typ połączenia bagnetowego próżniowego z kołnierzami i śrubami
odel
Połączenie
Typ
Średnica nominalna rury wewnętrznej
Ciśnienie projektowe
Tworzywo
rury wewnętrznej
Standard
Uwaga
Nominal Diameter of Inner Pipe
00X
8~16 bar
DN10, 3/8"
8~16 bar
Stal nierdzewna serii 300
Design Pressure
Ciśnienie projektowe.
08 to 8 barów,
16 to 16 barów.
Materiał rury wewnętrznej.
A wynosi 304,
B to 304L,
C wynosi 316,
D to 316L,
E jest inne.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Seria separatorów faz z izolacją próżniową | DN10, 3/8" | ormiański
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| francuskiŚrednica nominalna rury zewnętrznej:X | DN15, 1/2" | |||||
| francuskiZalecane ≤ 16 barów. Można również wybrać typ połączenia spawanego (≤ 40 barów).X | DN20, 3/4" | |||||
| francuskiStan zasilania:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: islandzki
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| francuski08 to 8 barów,00X | i 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| francuskiSamoański00X | DN15, 1/2" | |||||
| francuskiSindhi00X | DN20, 3/4" | |||||
| francuskitadżycki00X | DN25, 1" | |||||
| francuskitajski00X | DN32, 1-1/4" | |||||
| francuskiuzbecki00X | DN40, 1-1/2" | |||||
| francuskiXhosa00X | DN50, 2" | |||||
| francuskiZulus00X | DN65, 2-1/2" | |||||
| francuskiOrija00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Stan zasilania:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | Stal nierdzewna serii 300 | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| francuskiDN15, 1/2"00X | DN15, 1/2" | |||||
| francuskiDN20, 3/4"00X | DN20, 3/4" | |||||
| francuskiDN25, 1"00X | DN25, 1" | |||||
| francuskiW03200X | DN32, 1-1/4" | |||||
| francuskiW04000X | DN40, 1-1/2" | |||||
| francuskiW05000X | DN50, 2" | |||||
| francuskiW06500X | DN65, 2-1/2" | |||||
| francuskiW08000X | DN80, 3" | |||||
| HWąż do płaszcza próżniowego00X | DN100, 4" | |||||
| HChiński zawór regulujący przepływ ciekłego tlenu00X | DN125, 5" | |||||
| HCena hurtowa Chiny Chiny Standardowy zbiornik ISO 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSDynamiczny system pompy próżniowej00X | Seria separatorów faz z izolacją próżniową | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| francuskiWhatsApp00X | DN15, 1/2" | |||||
| francuskiWeChat00X | DN20, 3/4" | |||||
| francuskiniemiecki00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: grecki
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
duński
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaotańskiX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | ormiański
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHestońskiX | DN15, 1/2" | |||||
| HLHfryzyjskiX | DN20, 3/4" | |||||
| HLHGudżaratiX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: islandzki
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalajalam00X | Maoryski | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDSamoański00X | DN15, 1/2" | |||||
| HLHDSindhi00X | DN20, 3/4" | |||||
| HLHDtadżycki00X | DN25, 1" | |||||
| HLHDtajski00X | DN32, 1-1/4" | |||||
| HLHDuzbecki00X | DN40, 1-1/2" | |||||
| HLHDXhosa00X | DN50, 2" | |||||
| HLHDZulus00X | DN65, 2-1/2" | |||||
| HLHDOrija00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
